bluetooth version:bluetooth 5.0
Operation Range: Up to 10m (without any blocking objects)
Working Hours:RX>10_H TX>10_H
Charging Hours:about 3 hours
Input/output connection:SPDIF, 3.5MM stereo audio interface
This product has a built-in rechargeable battery for long-term standby and use. When the product is in normal use,
to fully charge it before using it for the first time.)
USB 5V power output port (such as mobile phone charger, computer USB interface).
1. When the battery is too low or the quality of the charging power is poor, current interference noise may occur during charging.
protection can not supply power.
the boot is successful.
automatically enter the pairing state (the TX/RX lamp effect is different)
When the toggle switch is connected to AUX, the interface audio cable will automatically switch to AUX (input/output),
and you can use AUX according to your preference. Or SPDIF mode. In SPDIF mode, the device plugs into the SPDIF
IN port and implements the TX (transmit) function. It is also necessary to insert the SPDIF OUT port to implement the RX (receive) function.
- In RX mode, AUX is connected to external speakers.
Automatic shutdown function:
on and off again.
with AUX/SPDIF audio input interface through the bluetooth receiving function of the product.
is turned on, "the red and blue lights are on (the red light is off after 1S).
the other end of the fiber optic cable or 3.5MM audio cable into the audio input port of the audio device in the home. Switch
freely through the SPDIF/AUX switch on the side of the device
“_RBT-551_” in the bluetooth list.
(bluetooth headset) or bluetooth speaker.
When the device is turned on, the blue light flashes twice and goes out once (cycle 2S), and the boot is successful.
optic cable into the TV output interface of the home.If you are using the AUX audio interface, please insert the 3.5MM audio
cable into the AUX interface on the device, and insert the other end of the audio cable into the TV audio output connector in the home.
connect this product and a bluetooth device (such as a bluetooth headset) within 1M.
1.Different bluetooth devices (such as bluetooth headsets) will have different search connections depending on the protocol and protocol used.
which can improve the connection speed.
This product supports 24bit/48KHZ transmission.
TX transmission mode one for two functions:
bluetooth device No. B (bluetooth earphone or speaker) and put it in the standby connection state.
to search for the bluetooth device No. B (bluetooth earphone or speaker). After searching for the bluetooth device
No.B, it will automatically connect.
(bluetooth headphones or speakers) emit sound at the same time.
1.If you cannot search for the bluetooth device connected to B, you can double-click the power button on the device.
is not normal after connecting the bluetooth device (such as no sound), you can try to shut down and
restart the transmitter device.
or speakers), the next time the transmitter mode is used, the next two connections may be unsuccessful and no sound.
You can try to disconnect a bluetooth device.
1x bluetooth transmitter Receiver
1x Product Specification
1x USB charging cable
1x 3.5MM audio cable
1x RCA audio cable
1x Fiber optic cable